James Duff - The Early Ford Bronco, Bronco II & Ford Ranger Parts and Accessories Specialist
HOME PAGE
ABOUT US
NEW PRODUCTS
BRONCO II & RANGER
CLASSIC BRONCO
CUSTOMERS' RIDES
APPAREL & THINGS
BOOKS & STUFF
EVENT COVERAGE
MAP TO US

-ONLINE ORDER FORM

-CONTACT US

-UPS ORDER TRACKING

West Coast Bronco
East Coast Broncos
James Duff Broncos
James Duff Bronco


Duff Tuff Online Shopping
MORE E-COMMERCE
SHOPPING AT DUFFTUFF.COM!

Hot New Early Ford Bronco Products

CLICK A LINK BELOW FOR THE FOLLOWING NEW PRODUCTS:

NEW PRODUCTS
FOR EARLY FORD BRONCOS


4Link Suspension for Dana 60 or 70, Sterling 10.25 & 14 Bolt

Our new four link system is for the Bronco enthusiast who wants to swap in a one ton rear end and take their rig to the next level- but without all the fuss! Our High Clearance, Dual Triangulated tubular design comes with everything needed for an easy to install Bronco four link system.

•Axle mounts are easy with our weld on truss assembly. One truss works for Dana 60, 70, 14-bolt and Sterling 10 1/4 with the appropriate diff ring for center support. Includes upper and lower link attachments, lower shock mounts, coil cup & seat mounts all custom laser cut and engineered for extra strength.

•Weld on frame brackets can be welded where you want them, allowing you to stretch your wheelbase if you want. (Up to 2” without rear crossmember modification.)

•Lower links are made with the same huge 2" OD 3/8” wall DOM tube as our Radius Arms, tough enough to take any abuse from trail obstacles. Blue powdercoated and finished off with left and right hand threaded 1" rod ends for easy adjustment.

•Upper links are blue powdercoated 1 1/2" OD .120 wall DOM with left and right hand threaded 3/4" Rod ends for adjustment for varying lift heights.

•Blue powercoated Progressive Rate Coil Springs give approximately 5 1/2” of lift (depending on vehicle). Our weld on Coil Buckets can be installed to achieve different ride heights. Coils are secured on the bottom with our new HD lower retainers.

•New Zinc plated shock mount crossmember mounts two shocks inboard, two outboard and allows the addition of our Sway bar (in the final testing stages) for those of you who want a more stable streetable ride. Dual Duff shocks and lower shock mounts integrated into truss. No cutting into the body needed with 2” body lift.

A REAL Complete system ready to deliver amazing articulation. Not recommended for street trucks without swaybar upgrade. Welding required. Exhaust modifications likely, may require relocating a brake hose bracket or e-brake cable.

DIY 4LInk is for use with coilovers or airshocks. It does NOT include coils, coiil towers & retainers, shocks or shock crossmember.

#5371-1 Dana 60 Rear Diff Ring
#5371-2 Dana 70 Rear Diff Ring
#5371-3 Sterling 10 1/4” Diff Ring
#5371-4 14 Bolt Diff Ring
Diff ring is included in Kit Price-- Specify Which Ring when ordering
PART# 5370 - Stage 4-Link Suspension for One-ton Axles $1695
PART# 5370 DIY - Stage 4-Link DIY Kit for Coilovers or Airshocks $1195
PART# 5371-10 - Diff Guard/Ring for 10.25 Sterling Axle $incl. in kit
PART# 5371-14 - Diff Guard/Ring for 14 Bolt Axle $incl. in kit
PART# 5371-67 - Diff Guard/Ring for Dana 60 or 70 Axle $incl. in kit
PART# 5000V - System V: Monster System with One Ton 4Link Rear, 66-75 Bronco $2995
PART# 5001V - System V: Monster System with One Ton 4Link Rear, 76-77 Bronco $2995


Winch Plate Bumper

Winch bumper for up to a 9500 pound winch. Designed to maximize approach angle, yet with the lowest possible winch mount height for maximum air-flow to the radiator.

Constructed of a combination of 3/16” and 1/4” plate for maximum strength without too much weight. 1/4” plate wrap around protection for lower fenders. Laser cut openings for jacking points and attachment points for shackles. Same model fits with or without body lift. Shown on Hi-Ho with 2" body lift and on the Red Wagon stock.
PART# 4935 - Winch Plate Bumper $475


Plate Bumper with Tire & Jack Carrier

Our new plate bumper was designed with form and function in mind. Constructed of a combination of 3/16” and 1/4” plate for maximum strength without too much weight in a design created to maximize ground clearance and departure angle. 1/4” plate wraps around, protecting the lower quarters. A 2” receiver hitch (with easily accessible pin) and laser cut jacking points can be combined with our proven camlatch tire, can carrier and cooler racks. Includes Jack/Tire Carrier and pivots on both sides for easy can carrier addition. Can carrier recently redesigned for a cleaner look. Laser cut JD logo in plate steel replaces the previous strap design. Includes oil light bushings for smooth operating long lasting function and our exclusive easy to use cam latch design.


PART# 4937 - Rear Plate Bumper with Tire & Jack Carrier, no body lift $685
PART# 4937 BL - Rear Plate Bumper with Tire & Jack Carrier, for 2" body lift $685
PART# 4981C - Can Carrier addition for Rear Carrier Bumper $249
PART# 4982 - Cooler Rack Addition $200


Track Bar Raise Bracket

Made of 1/4" steel plate reinforced in critical areas. Great alternative to a drop bracket as it keeps the steering up higher and out of the way of trail obstacles. For use with 3.5"+ lift, necessary with our Knuckle Flip Kit on a 76-77. Requires welding. Comes black painted and includes hardware.


PART# 5406 - Track Bar Raise Bracket $69


Removable Door Hinges

These are perfect for those of you who love to go door-less during the summer or while wheeling. These new hinges also make it easy to simply remove your doors if they are in imminent danger. Our beefy new forged steel hinges have 1/2” pins with replaceable permanently lubricated brass oilite bushings for smooth operation. Our design reverses the side the pin stays on, the pin goes with the door—no hook to get caught on when the door is off. Combine with our Trail Doors and you’ve got doors for all seasons.

Also a viable option for those needing new hinges—the cost of stock hinges is unbelievable and they still have their weak 1/4” pins. Set of four hinges includes new bolts.
PART# 4235 - Removable Door Hinges, Set of four, New Lower Price $199


Monster Suspensions

These systems take our Ultimate and Long Travel Suspension all the way with the addition of our Stage 3 Extended Radius Arms, Extended Length Brake Hoses, E-brake cables, a Heavy Duty Bump Stop kit and a Drop Pitman Arm.

SYSTEM M: 5.5" Monster Suspension
5.5" Progressive Rate Coils, 7° 14 piece Bushing Kit, 11 Leaf Springs, Stage 3 Extended Radius Arms, HD Track Bar Drop Bracket, U-bolts, Stage 2 Shock Hoops, Stage 2 Rear Shock Mounts, 4-8120 Long Travel Shocks, 4-8114 Shocks, Shackle Bushings.
*At least a 2” body lift required.

SYSTEM P: 5.5" Monster Suspension - for vehicles without a body lift
5.5" Progressive Rate Coils, 7° 14 piece Bushing Kit, 11 Leaf Springs, Stage 3 Extended Radius Arms, HD Track Bar Drop Bracket, U-bolts, Original Stage 1 Shock Hoops, Stage 1 Rear Shock Mounts, 4-8114 Shocks, 4-8115 Shocks Shackle Bushings, Brake hoses, E-brake cables, HD Bump stops and a 66-75 Drop pitman arm.

SYSTEM R: 3.5” Monster Suspension
3.5” Progressive Rate Coils, 6° 14 piece Bushing Kit, 11 Leaf Springs, Stage 3 Radius Arms, HD Track Bar Drop Bracket, U-bolts, Stage 2 Shock Hoops, Stage 2 Rear Shock Mounts, 4-8120 Long Travel Shocks, 4-8114 Shocks, Shackle Bushings. *At least a 2” body lift required.

SYSTEM S: 3.5” Monster Suspension for vehicles without body lift
3.5” Progressive Rate Coils, 6° 14 piece Bushing Kit, 11 Leaf Springs, Stage 3 Radius Arms, HD Track Bar Drop Bracket, U-bolts, Original Stage 1 Shock Hoops, Stage 1 Rear Shock Mounts, 8-8115 Shocks, Shackle Bushings, Brake hoses, E-brake cables, HD Bump stops and a Drop pitman arm.


PART# 5000M-MD - System M: 66-75 Bronco, Medium Duty Leafs $2395
PART# 5001M-MD - System M: 76-77 Bronco, Medium Duty Leafs $2395
PART# 5000M-HD - System M: 66-75 Bronco, Heavy Duty Leafs $2395
PART# 5001M-HD - System M: 76-77 Bronco, Heavy Duty Leafs $2395
PART# 5000P-MD - System P: 66-75 Bronco, Medium Duty Leafs $2395
PART# 5001P-MD - System P: 76-77 Bronco, Medium Duty Leafs $2395
PART# 5000P-HD - System P: 66-75 Bronco, Heavy Duty Leafs $2395
PART# 5001P-HD - System P: 76-77 Bronco, Medium Duty Leafs $2395
PART# 5000R-MD - System R: 66-75 Bronco, Medium Duty Leafs $2395
PART# 5001R-MD - System R: 76-77 Bronco, Medium Duty Leafs $2395
PART# 5000R-HD - System R: 66-75 Bronco, Heavy Duty Leafs $2395
PART# 5001R-HD - System R: 76-77 Bronco, Heavy Duty Leafs $2395
PART# 5000S-MD - System S: 66-75 Bronco, Medium Duty Leafs $2395
PART# 5001S-MD - System S: 76-77 Bronco, Medium Duty Leafs $2395
PART# 5000S-HD - System S: 66-75 Bronco, Heavy Duty Leafs $2395
PART# 5001S-HD - System S: 76-77 Bronco, Heavy Duty Leafs $2395


Trail Doors and Removable Hinges

These doors are the result of too many long hot trail rides! They are perfect for those who want the cooling comfort and trail visibility of going doorless, but want a more secure feeling. They utilize our removable hinges and a cam latch that secures to your stock striker— so you can switch back and forth with your hard doors easily! Suzanne specifically requested the perfect armrest height, corner plate and close lower bar to keep your valuables from sliding out while on the trail. Made of .090 wall tubing for strength without being too heavy. A 1/2” hinge pin is built into the door that slides into a brass oilite bushing on the hinge. Come bare so you can paint to match your rig. We have clamp on mirrors already available. Watch for covers & padded armrests for these in the future!
PART# 7005 - Trail Doors, 68-77 Bronco* *Require use of #4235 hinges $325
PART# 7005 & 4235 - Trail Doors with Removable Door Hinge Set Combo Price $475
Last
CLICK A LINK BELOW FOR THE FOLLOWING NEW PRODUCTS:

Ford Bronco II and Ranger Catalog

James Duff
6609 Bronco Dr., Knoxville, TN 37921

Phone: 1-865-938-6696
7am-3pm M-F West Coast
10am-6pm M-F East Coast

Fax: 1-865-938-6746
24 Hours

Classic Ford Bronco Catalog

BRONCO II & RANGER
ONLINE CATALOG

CLASSIC BRONCO
ONLINE CATALOG

GO TO:
HOME
|
EVENT COVERAGE | CUSTOMERS' RIDES | BOOKS
APPAREL
| MAP | ABOUT US | CONTACT US | ORDER ONLINE

Though efforts have been made to keep our website up to date, prices, descriptions and
availability are subject to change without notice.

©JAMES DUFF ENTERPRISES, INC - ALL RIGHTS RESERVED
DO NOT DUPLICATE WITHOUT PERMISSION

WE ARE YOUR EARLY FORD BRONCO,
FORD BRONCO II & FORD RANGER PARTS & ACCESSORIES SPECIALISTS!


DESIGN, S.E.O. & HOSTING BY:
DUANE ELLIOTT ENT.