EARLY FORD BRONCO
AXLES, HUBS, SPINDLES, LONG TRAVEL
DRIVESHAFT & HARD PARTS
Warn
Hubs
For the ultimate in hubs, the name Warn says it all. Alloy housing
and internal wave spring ensure positive engagement of four wheel
drive to the front end. If you’re tired of your stock Ford hubs
with worn out springs and collars, these make a quick and worthwhile
replacement to end hassles forever. Warn Lifetime Warranty. Choose
standard hub with plastic dial or the Premium Hub with Brass plated
Aluminum dial. Fits 66-96 Bronco and F-150.
#5905 Standard Hub, $94.95
#5910 Premium Hub, $114.95 |
  |
|
|
Dana
44 Spindles
Come
with interior needle bearing.
#3733 Spindles, 76-77, $199.00 - pair |
|
|
Driveshafts
Heavy duty, high quality Spicer driveshafts are the best available.
Designed specifically for Broncos with 2 to 3.5 ”of lift. #3813
can be used to convert '66-'69 to '70-'77 style driveshaft front & rear.
Does not include rubber dust boot.
#3811 Front Driveshaft, 70-77, $289.00
#3812 Rear Driveshaft, 70-77, $289.00
#3813 Output Yoke Companion Flange, 70-77*, $79.50
* Used to convert the '66 - '69 yoke to a flange which will be compatible to any '70-'77 style driveshaft |
Long Travel Driveshafts
Our long travel driveshafts are perfect for suspensions with lots of flex! The last thing you want at full droop is your driveline coming apart! Our high quality drivelines feature full length splines for lots of travel. DOM with a steel center Spicer CV housing, and heavy duty greaseless Spicer 1310 U-joints. Come ready to install, precision balanced for long lasting vibration free operation and painted black for rust prevention. To ensure that the shaft will be the proper length, measure from yoke face to yoke face, as shown in the diagram below. #3813 sold below will be necessary to convert 66-69 (Borg Warner style) to (Spicer 1310 style). 12 month/12,000 miles warranty against failure due
o manufacturers defects.
#3818 Front Long Travel Driveshaft, $349.00
#3819 Rear Long Travel Driveshaft, $349.00
|
Spicer Driveshaft & Axle U-Joints
1310 |
Dana 44 |
The best needle bearing u-joints on the market. We use these heavy duty, high quality greaseless Spicer U-joints because let’s face it, no one greases the greasable as they should and these take the abuse!
| Part# |
Application |
Cap Dia. |
Clip-Clip |
Price Ea. |
| 3815-10 |
1310 Driveshaft |
1.060 |
3.225 |
$19.95 |
| 3815-30 |
1330 Driveshaft |
1.060 |
3.635 |
$21.95 |
| 3815-50 |
1350 Driveshaft |
1.185 |
2.225 |
$24.95 |
| 3765-44 |
Dana 44 Axle |
1.185 |
2.225 |
$29.95 |
| 3765-60 |
Dana 60 Axle |
1.375 |
3.090 |
$39.95 |
|
|
|
Balljoints
Better than OEM, these high quality balljoints are splined to prevent slipping. Includes one upper and one lower, does one side. Two sets are needed for a front end.
#3825 Ball Joint, Upper & Lower, pair, $55.00 |
|
|
Wheel Hubs
#3736 Front Hub, 76-77, each for discs, studs included, $90.00
|
|
 |
Hub
Tool
Keep this item in your tool box at all times! lt is necessary for
front bearing, brake or inner axle shaft work. Don't let anyone use
a chisel and screwdriver on your lock nuts as this not only damages
them but guarantees and improperly torqued wheel bearing. This can
lead to bearing failure or even the whole hub, rotor, tire and wheel
coming off! Uses 1/2" drive. Works on Dana 30, 44 and Warn Full Floaters.
#5900 Hub Tool, $17.50 |
|
|
3231 NW Park Dr., Knoxville, TN 37921
Phone: 1-865-938-6696
7am-3pm M-F West Coast
10am-6pm M-F East Coast |
Fax: 1-865-938-6746
24 Hours |
|
|
|
