|
Body
Panels
All sheetmetal pieces listed
here are made of 18 or 20 gauge steel and most are prime lock material.
They are designed to be welded or riveted into place by a professional
body shop and may require some fitting. They come in gray primer if noted
in the product description. PLEASE NOTE: Right side is passenger's side,
left is driver's. Please specify when ordering. |
 |
Fenders
Black electrostatically primed 20 gauge.
#4208 Right (pass), Currently not available
#4209 Left (driver), $199.00 |
 |
Grills
Factory reproduction comes black electrostatically primed for rust
protection. Fits 66-77. 66-77 Fiberglass grill also available.
#4206 Fiberglass Grill, $295.50
#4207 Steel Grill, $450.00 |
 |
 |
Windshield
Frame
Our high quality reproduction is made out of galvanealed 16 gauge
steel. Includes stainless mounting hinge and all necessary mounting
holes to bolt up components and top. Designed for factory electric
windshield wipers.
#4150 Windshield Frame
Currently not available |
|
A
#4017 Stainless Windshield Hinge, Out of Stock
B #4170 Lower Tailgate Repair Panel, $45.00
D #4181 Core Support Body Mounts, Kit $64.50
E #4192 Upper Quarter panel, fits R or L, $120 ea.
G #4201 R or L, Lower Rear Quarter, $120.00 ea.
H #4204 Rocker Panel, fits R or L, $100.00 ea
I #4203 R or L, Tail Light Panel R or L, $50.00
K #4205 Wheel Housing fits R or L, $75.00
L #4206 Fiberglass Grill, $295.00
L #4207 Steel Grill, $450.00
M #4208 Stock Fender, primed, R, $260.00
N #4209 Stock Fender, primed, Driver Side $260.00
#4210 Door Post, R, $219.00
O #4211 Door Post, L, $219.00
#4212 Striker Post, 68-77, R, $99.50
P #4213 Striker Post, 68-77, L, $99.50
#4242 Striker Post Brace, 66-67, R,$25
#4243 Striker Post Brace, 66-77, L, $25
Q #4214 Inner Fender Apron, R, $89.00
R #4215 Inner Fender Apron, L, $89.00
S #4216 Kick Panel, R, $89.00
T #4217 Kick Panel, L, $89.00
#4218 Battery Tray, $34.50
U #4219 Battery Tray Support-need 3, Kit $59.95
V #4226 Outer Door Skin, R, N/A
V #4227 Outer Door Skin, L, N/A
W #4240 Inner Ft. Fender Tub, R, $119.00 ea.
X #4241 Inner Ft. Fender Tub, L, $119.00 ea.
|
 |
Core
Support
Yes, we are proud of our high quality 16 gauge core support! It has one
piece that reaches from fender to fender and has three times the spot welds
as others on the market! Includes bump out for the power steering box. Radiator
hangars sold separately.
#4180 Core Support, $330.00 |
 |
Tailgate
These high quality reproduction tailgates are better than original. These
are made of rust resistant galvanized steel just like what Ford uses on
brand new trucks.
#4110A Reproduction Tailgate, $425.00 |
Floor
Panels
Prime lock 18 gauge. Driver side front lip tapers from 11" tall under
the gas pedal to 5.75" under the dimmer switch. Inside edge lip tapers
from 4" at front to 2.5" at rear. Passenger side front lip is
4.5" Inside edge lip is 2.5" tall. Back lip on both turns up 2"
#4220 Floor Panel, Passenger, $59.00
#4221 Floor Panel, Driver, $49.00 |
 |
Kick
Panels
These 20 gauge repair panels attach to the door post and floor panel and
extend forward to the inner fender aprons. Right side has a hole for the
heater air intake.
#4216 Kick Panel, Passenger, $59.00
#4217 Kick Panel, Driver, $59.00 |
 |
Door
Skins
To replace damaged door skins, grind off the outer edges and peel off the
old panel. Slip this new 20 gauge panel on, roll the edges and weld to the
door frame. Has holes for hinges, handles and locks.
#4226 Right Passenger Side, $148.00
#4227 Left Driver, $148.00
 |
Inner
Fender Aprons
These inner fender aprons extend from the kick panel seam (6" forward
of the firewall) to the radiator core support. Fender holes along top edge
are not drilled. 20 gauge.
#4214 Inner Fender Apron, R, $59.00
#4215 Inner Fender Apron, L, $59.00
 |
Lower
Tailgate Panel
This piece is for repairing the bottom of the tailgate, rather than replacing
the entire thing. The 20 gauge prime lock panel is a press fit and requires
spot welding. It comes up to the first crease line on the outside at 3 5/8"
and 2" on the inside.
#4170 Tailgate Repair Panel, $44.75
 |
Rear
Wheel Housing
20 gauge black electrostatically primed.
#4205 Fits R or L, $75.00
 |
Tail
Light Panel
20 gauge black electrostatically primed.
#4203 L driver, $50.00
#4203 R pass, $50.00
|
 |
Door
& Striker Posts
Door post is “hinge side” and comes with hinge retaining plates.
Striker post is “handle side”. 17 gauge prime lock.
#4210 Door Post, R, $219.00
#4211 Door Post, L, $219.00
#4212 Striker Post, 68-77, R, $82.50
#4213 Striker Post, 68-77, L, $82.50
#4242 Striker Post, 66-77, R, $82.50
#4243 Striker Post, 66-77, L, $82.50 |
 |
Door
Bottom Panel
Repair the bottom of your rusted-out door with this 18 gauge weld-in repair
panel.
Fits right or left.
#4222 Inside Door Bottom, R or L, Currently not available |
 |
Quarter
Panel Kit
All pieces are 20 gauge; striker post, tail light panel and upper and lower quarter panel. Pieces are sold unassembled and should be installed by a professional body shop. Due to the number of configurations, these are no longer sold in kit form. Pieces are sold individually, for breakdown see the diagram at the top of the page.
|
 |
|
3231 NW Park Dr., Knoxville, TN 37921
Phone: 1-865-938-6696
7am-3pm M-F West Coast
10am-6pm M-F East Coast |
Fax: 1-865-938-6746
24 Hours
|
|
|
|
|
