(PAGE 2 of 2)
Sportsman Suspension Seats
The original suspension seat has been tested from Baja Racing to Moab Rock Crawling. These purpose built seats are the best quality we’ve found. After trying numerous brands, this is what we now have in HiHo Silver.
Each seat starts with .065 wall tubing as a foundation covered with double straps for additional comfort and support. The suspension inner is made of one piece nylon mesh that provides extreme strength and a comfortable ride yet allows the seat to breathe and allow moisture to pass through. Polyurethane foam of different thickness and density provide a shaped seating surface, while the 40 oz. vinyl sides and breathable fabric make a durable yet comfortable seat.
The Sportsman is a low profile suspension seat with a fixed headrest, 5 point seatbelt holes, loops to secure belts in place, and a mid-height (5.5”) side bolster for easy entry and exit, while still offering security. The floor mounting area is 16” from front to back and 14” wide, seating height is approx. 3.5” from the floor. Other models and options are available including; adjustable headrest, lumbar support and seat heat, please call for details. Require seat mounting brackets, sold separately below.
#4740 B Sportsman Seat, each, Black $329.95
#4740 B/G Sportsman Seat, each, Black & Gray $329.95
Seat Mounting Brackets
We worked closely with Mastercraft to design and test these brackets. They allow the seat to sit lower than most aftermarket seats, giving you great visibility. No more looking through the wiper blades! Hardware allows you to preset the most comfortable amount of tilt to the seat, mount using stock seat mounting holes, slide using the underseat bar. Come powder coated black.
#4739 D or P, Mounting Brackets with Slides, Specify side $179.95
Rear Suspension Bench
The Mastercraft bench seat is made with same quality components as the front buckets but with room for two and it fits perfectly between the wheel-wells. Rear seats feature 4 point harness slot, harness loops, available with or without adjustable headrests. Seat is 40” wide and requires drilling three holes for installation. Colors available by special order.
#4742 Sportsman 40" Bench Seat, Black $474.95
Protect your investment from the sudden down pour with no top, trail dog, or muddy jeans with seat saver seat covers. Allows you to sit in the seat when it is covered. Made from heavy duty Cordura material and Velcro latches the front and sides.
#4745 Seat Savers, Specify Red, Blue, or Black
These are replacement carpet kits for the models that came with factory
installed carpet. This plush carpet is molded to fit the floor boards. Trimming
to fit shifters and around doors will be necessary. The front only kit covers
from the firewall to just behind the front seats. The complete kit covers
the whole floor in 2 sections, has 2 wheel well covers and a piece to cover
the tailgate. Wheel well pieces are designed to be tucked under the original
interior trim panels. Call for special order color samples.
#4612 Front only Carpet Kit, Black, $189.00
#4615 Complete Carpet Kit, Black, $249.00
#4620 Complete Carpet Kit, Dark Gray, $249.00
#4625 Complete Carpet Kit, Medium Blue, $249.00
Textured black vinyl is contoured to fit floorboard. Complete kit is 3 pieces:
the tailgate, the floor and the rear seam under the molding behind the front
seats. Jute padding is under the front piece only. Minor trimming is needed
for shifters and the gas tank switch. Wheel wells are not included.
#4606 Black Vinyl Mat, complete set, $249.00
#4608 Black Vinyl Mat, front only, $199.00
8" console without radio compartment, Specify B or G, $217.00
Center Console and Lock Box
has built a name as being one of the toughest lock boxes in the industry.
We offer their 16 gauge steel lock boxes with or without a separate box
for a stereo or CB. Center consoles feature a built in padded arm rest,
two large cup holders, Neoprene lid seal, convenience tray, removable inner
shelf and their custom Pry-Guard Locking System with Cylindrical Lock. Available
in both 8 and 10" wide version to fit stock or aftermarket seats and
come with mounting brackets and grade 8 hardware. Consoles are 16 1/2"
high and 24" long.
Rear lock box is made from
the same stout 16 gauge steel and offers their Pry-Guard Locking System
and Neoprene seal. 9 5/8 x 33 7/8 wide x 11 3/8 tall. Fits great behind
the Bronco seat.
Please specify Black or Gray
textured powdercoat by using the suffix B or G respectively.
#4794 10" console without radio compartment, Specify B or G, $229.00
#4795 8" console with radio compartment, Specify B or G, $264.00
#4796 10" console with radio compartment, Specify B or G, $271.00
#4797 Rear Seat Lock box, Specify B or G, $275.00
6609 Bronco Dr., Knoxville, TN 37921
7am-3pm M-F West Coast
10am-6pm M-F East Coast