|
POWER BRAKES, HOSES, LINES & CABLES
Power Brake Booster Kit
Specifically designed for the Early Bronco,our system brings the Broncos hydraulic brake system up to modern standards. This Premium 8” Vacuum brake booster provides better power brakes without denting the inner fender well! This brand new (not rebuilt) booster is cadmium plated for superior corrosion resistance and long lasting good looks. Even the master cylinder cap is Cadmium plated! Uses same booster bracket as our #3700 kit, designed just like OEM for optimum reliability and linkage alignment. We ’ve included everything you’ll need except the brake fluid, even a pair of hoses to go between the master cylinder and the proportioning valve or block valve. Stainless Steel Braid Hoses feature a smaller inner diameter over stock rubber hoses and won ’t swell-which means increased performance and improved brake feel. Plus there is NO fabricating brake lines to make it all work! 1 1/8” bore master cylinder for all brake setups including; drum/drum, disc/drum or disc/disc.
.
|
#3707 Disc / drum or disc / disc
1 1/8” bore master cylinder system,
$435.00
|
|
|
OEM Style Power Brake Booster & Bracket
This booster bracket is styled after Ford’s 76-77 bracket, modified to accommodate disc or drum brakes on 66-77 Broncos with 6 cylinder or V8, even 351. This blue powder coated bracket comes with gold zinc plated bell crank, clevis pins, adjustable push rod and accordion boot for the hole in the firewall. Requires clearancing the fender well.
#3700 Power Brake Booster Bracket, $125.00
|
|
 |
Stainless Steel Braided Brake Hoses
Lifted Broncos with lots of travel need longer brake lines to get the most from the suspension.These custom lines are stainless steel and DOT approved for street legality as well as being longer to accommodate suspension travel.These lines won 't swell under pressure like rubber ones will.Smaller inside diameter increases pedal feel and brake response. Beware many replacement lines are not DOT approved!We have these specially made
so you don 't have to guess when it comes to the safety and soundness of your
brakes. Fits stock to 6" lifted 66*-77 Broncos. Note:*66 &67 may need adapted to fit front hose.
#3931 Stainless Braided Hoses, stock to 6" lift,
66-77, pair, $79.00 |
|
Master Cylinder to Proportioning Valve Brake Lines
These stainless steel braided hoses replace the old factory rubber and hard line hoses from the mastercylinder to the proportioning valve. Please specify brake set up when ordering to get proper fitting sizes. Not Pictured.
#3742 Stainless Steel Brake Lines, please call for applications, $89.00
|
Stock Length OE Style Brake Hoses
DOT approved factory style and length hoses. Not pictured.
#3734 Ft.discs to diff, pair (requires adapters on 76-77 Dana 44), $59.00
#3748 Passenger Front,76-77, $39.50
#3749 Driver Front, 76-77, $39.50
#3750 Front drums to diff, pair, 66-75, $45.50
#3752 Rear diff to frame 66-77, $42.50 |
|
 |
E-Brake Cables
This high quality, easy to install universal emergency brake replacement cable can replace the three pieces necessary to run the length of your 66-75 Bronco. It differs from the original only in the fact that it is longer and can be shortened to replace any of the three. This cable is a must if you’ve lifted your rig and your stock cables are tight. 76-77 cables are available in stock lengths. Not Pictured.
#3756 Universal Cable (1), $24.00 |
|
|
|
3231 NW Park Dr., Knoxville, TN 37921
Phone: 1-865-938-6696
7am-3pm M-F West Coast
10am-6pm M-F East Coast |
Fax: 1-865-938-6746
24 Hours
|
|
|
|
|
