|
|
NEW BUMPER DESIGNS COMING SOON! PLEASE CHECK BACK.
|
Our own Cam Latch design offers easy
opening and no loss of departure angle.
Pivots feature oil impregnated bushings and a drop pin automatically holds the carrier open for easy tailgate access.
|
Bronco II Modular Tire Carrier
Stock carriers just don't stand up to the weight of an oversize tire. The extra weight can cause the factory mounts on the quarter panel to tear. So, we designed a carrier system utilizing our proven 2" receiver hitch bumper. It will carry up to a 35" tire while also providing a location for a Hi-Lift Jack! Tire mounts with wheel studs and included lug nuts but can also use locking lug nuts for security. Jack sits on a steel base and is secured with a T-Handle. Quick and easy access thanks to our own Revolutionary Cam-latch design. The pivots feature oil impregnated bushings for long life and a drop pin automatically holds the carrier open for easy tailgate access. The optional carrier basket (sold separately) is set up for a 5 gallon "Gerry" can but readily accepts water, antifreeze jugs or a trash can! License plate mounting holes provided. (see #9640 Light Bolts for illumination of the plate). Available in bare steel or black powdercoated.
#7920A Bronco II Tire Carrier, (Bare) $649.00
|
|
|
|
Receiver
Style Pre-runner Bumpers
With Duff Flectors
We've created some of our most versatile bumpers ever by
adding a 2" receiver hitch to our popular Pre-runner design.
Receiver hitches
give you the flexibility to:
·Attach a multi-mount winch to the front or rear when you need it.
·Remove it for the daily commute, taking the load off of the
suspension, leaving the winch safe at home.
·Tow and maneuver trailers from front or rear mounts.
·Attach other accessories for 2" receiver
|
 |
Comes bare
so you can choose your own finish. All bumpers include provisions
to mount license plates. Receiver and winch bumpers also include
frame reinforcements. Please see multi-mount winch frame and optional
rear power lead kit information. |
|
#7910 Rear Receiver Bumper (Bare) '84-'90 Bronco II $379.00
#7911 Rear Receiver Bumper (Bare) '82-'97 Ranger $379.00
License Plate Bolts
When replacing the factory rear bumper with a tube bumper, there isn't anywhere to mount the stock license plate lights. These bolts both hold the plate on and illuminate it, allowing compliance with most state laws. (Shown on the '94 Ranger).
#9640 License Plate Bolt Lights $34.50 |
|
|
3231 NW Park Dr., Knoxville, TN 37921
Phone: 1-865-938-6696
7am-3pm M-F West Coast
10am-6pm M-F East Coast |
Fax: 1-865-938-6746
24 Hours
|
|
|
|
|
